Clutch Update
I tore apart the tomos clutch last night to check on how the pads were holding up. I opened up the transmission to find this:
The material compressed a bit and flattened out from my original dremeling, which is good. Everything looks to be in very good condition except for the edges of 2 of the pads which seem to be peeling back from the clutch arm. This however is my own fault. When adhering the pads to the arms i didn’t apply the epoxy all the way to the edge of the arm. i only applied epoxy to where i wanted the pads to go. In hindsight i should have just applied it all the way to the edge to avoid the peeling of the pads. I’ll have to pick up some more material, enough to do both 1st and 2nd gear clutches and redo it. For now, i think the clutch will hold up fine for a while.